Einleitung

If the power button is broken or does not press properly, replace the small plastic button.

Ersatzteile

Kein Ersatzteil erforderlich.

Be sure cell phone is off before you begin to disassemble the phone. Press the button on the bottom of the back of the cell phone. Slide rear panel down and remove  it.
  • Be sure cell phone is off before you begin to disassemble the phone.

  • Press the button on the bottom of the back of the cell phone.

  • Slide rear panel down and remove it.

Kommentar hinzufügen

Using your fingernail, pry the back of the battery upwards and pull out. Using your fingernail, pry the back of the battery upwards and pull out. Using your fingernail, pry the back of the battery upwards and pull out.
  • Using your fingernail, pry the back of the battery upwards and pull out.

Kommentar hinzufügen

Insert the plastic opening tool under the faceplate. Separate the faceplate from main body by twisting the prying tool with some force. The faceplate is held by three plastic fasteners, so pry evenly on both sides of phone.
  • Insert the plastic opening tool under the faceplate.

  • Separate the faceplate from main body by twisting the prying tool with some force.

  • The faceplate is held by three plastic fasteners, so pry evenly on both sides of phone.

Kommentar hinzufügen

With the faceplate removed, simply peel off rubber key pad and remove. With the faceplate removed, simply peel off rubber key pad and remove. With the faceplate removed, simply peel off rubber key pad and remove.
  • With the faceplate removed, simply peel off rubber key pad and remove.

Kommentar hinzufügen

Locate and remove the six screws on the front of the phone using a T6 Torx. All 6 screws are 6.9mm long. All 6 screws are 6.9mm long.
  • Locate and remove the six screws on the front of the phone using a T6 Torx.

    • All 6 screws are 6.9mm long.

Kommentar hinzufügen

After removing screws, lift the motherboard assembly straight off the cell phone body. After removing screws, lift the motherboard assembly straight off the cell phone body. After removing screws, lift the motherboard assembly straight off the cell phone body.
  • After removing screws, lift the motherboard assembly straight off the cell phone body.

Kommentar hinzufügen

With the motherboard and LCD unit removed, gently pull the power button out of its housing. With the motherboard and LCD unit removed, gently pull the power button out of its housing. With the motherboard and LCD unit removed, gently pull the power button out of its housing.
  • With the motherboard and LCD unit removed, gently pull the power button out of its housing.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Curtis Lutje

Mitglied seit 07.10.2010

16 Reputation

12 Anleitungen geschrieben

Team

Cal Poly, Team 20-8, Maness Fall 2010 Mitglied von Cal Poly, Team 20-8, Maness Fall 2010

CPSU-MANESS-F10S20G8

4 Mitglieder

28 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,640