Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Nokia 2610 Front Pannel Replacement

Was du brauchst

  1. Nokia 2610 Front Pannel Replacement, Battery and Sim Card: Schritt 1, Bild 1 von 3 Nokia 2610 Front Pannel Replacement, Battery and Sim Card: Schritt 1, Bild 2 von 3 Nokia 2610 Front Pannel Replacement, Battery and Sim Card: Schritt 1, Bild 3 von 3
    • Place your thumb on the middle of the back cover and push it toward the bottom of the phone to slide the cover off.

  2. Nokia 2610 Front Pannel Replacement: Schritt 2, Bild 1 von 3 Nokia 2610 Front Pannel Replacement: Schritt 2, Bild 2 von 3 Nokia 2610 Front Pannel Replacement: Schritt 2, Bild 3 von 3
    • Use a plastic opening tool (or your finger) to gently pry the battery out of the battery slot on the back of the phone.

  3. Nokia 2610 Front Pannel Replacement: Schritt 3, Bild 1 von 3 Nokia 2610 Front Pannel Replacement: Schritt 3, Bild 2 von 3 Nokia 2610 Front Pannel Replacement: Schritt 3, Bild 3 von 3
    • Lift the metal sim card holder (at the bottom of the battery slot) up and carefully pry the sim card out of its slot with a plastic opening tool or your finger.

    • After removal, lower the metal sim card holder into its original position.

  4. Nokia 2610 Front Pannel Replacement, Front Pannel: Schritt 4, Bild 1 von 2 Nokia 2610 Front Pannel Replacement, Front Pannel: Schritt 4, Bild 2 von 2
    • Insert the plastic opening tool into the crack between the front and back panels.

    • Gently pry the front cover away from the back cover while sliding the plastic opening tool towards the top of the phone.

  5. Nokia 2610 Front Pannel Replacement: Schritt 5, Bild 1 von 2 Nokia 2610 Front Pannel Replacement: Schritt 5, Bild 2 von 2
    • Lift the bottom of the front cover away from the phone.

    • Continue lifting until the top of the front cover is fully removed from the phone.

    • Note: To replace the Keypad, gently lift it out of the front cover. It is located below the clear viewing window.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Andrew Wood

Mitglied seit: 10/05/10

336 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 7-52, Amido Fall 2010 Mitglied von Cal Poly, Team 7-52, Amido Fall 2010

CPSU-AMIDO-F10S7G52

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 2,116