1. To start, press one of the latches at the top of the phone to open the rear cover.
    • To start, press one of the latches at the top of the phone to open the rear cover.

  2. Carefully press the other latch.
    • Carefully press the other latch.

  3. Open rear cover by this side.
    • Open rear cover by this side.

  4. Press the three latches to open this side of the cover.
    • Press the three latches to open this side of the cover.

  5. Remove the rear cover.
    • Remove the rear cover.

  6. Removed rear cover. See  the latches .
    • Removed rear cover. See the latches .

  7. Remove the screws using Torx T6 screw driver.
    • Remove the screws using Torx T6 screw driver.

  8. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  9. Remove six T6 screws.
    • Remove six T6 screws.

  10. Remove the assembly. The front cover will be released.
    • Remove the assembly. The front cover will be released.

  11. The front cover released.
    • The front cover released.

  12. To remove the display , unscrew the T6 Torx  at top.
    • To remove the display , unscrew the T6 Torx at top.

  13. CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !
    • CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !

  14. Carefully disconnect the Flex cable connector. Then remove the display.
    • Carefully disconnect the Flex cable connector. Then remove the display.

  15. Carefully remove the adhesive keyboard membrane.
    • Carefully remove the adhesive keyboard membrane.

    • You can replace it at this step if you need to.

  16. You can clean the keyboard surface with alcohol, if you dropped a drink here.
    • You can clean the keyboard surface with alcohol, if you dropped a drink here.

  17. When you replace the keyboard membrane,  align the two contacts at bottom.
    • When you replace the keyboard membrane, align the two contacts at bottom.

  18. You can wash the front cover and keyboard if they are dirty.
    • You can wash the front cover and keyboard if they are dirty.

  19. Keyboard - clean it if necessary.
    • Keyboard - clean it if necessary.

  20. Rear side of the circuit board.
    • Rear side of the circuit board.

  21. Speaker and antenna contacts.
    • Speaker and antenna contacts.

  22. If necessary, you can replace the joystick, the button module or the connector housing.
    • If necessary, you can replace the joystick, the button module or the connector housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Jose Gustavo Abreu Murta

Mitglied seit: 06.07.2010

2.324 Reputation

7 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 9

Insgesamt: 6,730