Skip to main content

Einleitung

If the Touchscreen / Glass of your phone is broken, this guide will help you to disassemble the phone and replace the Digitizer.


__________________________________________ Video manual: __________________________________________

Einführungsvideo

  1. Switch off the phone and remove the battery. Switch off the phone and remove the battery.
    • Switch off the phone and remove the battery.

  2. Remove 8x Torx T5 screws. With a plastic tool, start with separating the middle frame from the down side. With a plastic tool, start with separating the middle frame from the down side.
    • Remove 8x Torx T5 screws.

    • With a plastic tool, start with separating the middle frame from the down side.

  3. The Loudspeaker is on the middle frame. Disconnect the LCD Display flex cable.
    • The Loudspeaker is on the middle frame.

    • Disconnect the LCD Display flex cable.

    • Disconnect the Touch screen flex cable.

  4. Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen

    Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen
  5. The Logic board is held by 2x locking clips at the bottom side. Release it and gently remove it from the front frame. Release it and gently remove it from the front frame.
    • The Logic board is held by 2x locking clips at the bottom side.

    • Release it and gently remove it from the front frame.

  6. Put tape on the glass to not scatter pieces. Worm the glass to melt the adhesive. Use plastic tools to separate the touchscreen from the frame.
    • Put tape on the glass to not scatter pieces.

    • Worm the glass to melt the adhesive.

    • Use plastic tools to separate the touchscreen from the frame.

  7. After separating, clean up the sticker that remains on the borders. New line.Install the new touchscreen and reassemble the device. New line.Install the new touchscreen and reassemble the device.
    • After separating, clean up the sticker that remains on the borders.

    • New line.Install the new touchscreen and reassemble the device.

  8. That's all.
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

ZFix

Mitglied seit: 09.12.2013

167.185 Reputation

305 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

290 Mitglieder

824 Anleitungen geschrieben

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 5

Past 30 Days: 15

All Time: 1,465