Was du brauchst
-
Schritt 1 Opening The Phone
Achtung: Schritt 1 stammt von einer Anleitung, die derzeit bearbeitet wird.
-
Remove the Sim card tray and locking bar, before applying pressure to to the top right corner of the plastic casing.
-
Using the opening tool, pry the screen from the casing until they are separated from each other.
-
-
-
-
Apply adhesive to back of camera
-
Attach ribbon to motherboard
-
Press down on camera for 60 seconds
-
Let dry for 5 minutes
-
-
-
Slide the hinges of the left side of the screen under the left side of the plastic case
-
Clamp the right side of the screen down and make sure screen is flat
-
The screen should "click" into place
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
This guide is forgetting to mention you have to take out the Sim card tray and the locking bar that holds the LCD in, if you don't you will break the housing and screen.
Matthew Babcock - Antwort