Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
Schritt 1 Opening The Phone
Achtung: Schritt 1 stammt von einer Anleitung, die derzeit bearbeitet wird.
-
Remove the Sim card tray and locking bar, before applying pressure to to the top right corner of the plastic casing.
-
Using the opening tool, pry the screen from the casing until they are separated from each other.
-
-
-
-
Apply adhesive to back of camera
-
Attach ribbon to motherboard
-
Press down on camera for 60 seconds
-
Let dry for 5 minutes
-
-
-
Slide the hinges of the left side of the screen under the left side of the plastic case
-
Clamp the right side of the screen down and make sure screen is flat
-
The screen should "click" into place
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.