Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Click open the USB input protector lid and pull it from the housing.
-
Also remove the SIM card holder.
-
Remove screws from the top using the T3 torx screwdriver.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Press your screwdriver against the backside of the white pieces of plastic, and the screen will click out at the top side of the phone.
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Using a plastic tool, carefully open up the distance between the screen and the housing until the screen is only attached with 2 cables.
-
With the same plastic tool, disconnect the screen cables still attached to the phone.
-
The screen is now separated from the rest of the phone.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Unscrew the marked screws using the T4 torx screwdriver.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Rotate the strip a quarter turn along the long axis, and lift it out.
-
Use the opening tool to lift the battery cover up and out.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Click open the battery connector from beneath the connector.
-
Lift the battery from the phone and replace it.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.