Einleitung

If the device will not turn on or has a broken power switch, use this guide to replace the switch.

Ersatzteile

Kein Ersatzteil erforderlich.

Unplug popper.
  • Unplug popper.

  • Remove plastic lid by picking the lid up.

Kommentar hinzufügen

Flip the popper on its side.
  • Flip the popper on its side.

  • Remove the screws on the bottom with the Phillips #2 phillips head screwdriver.

  • There are seven screws on the base. Five screws on the perimeter (12mm Philips #2 screws) and two in the middle (15 mm Philips #2 screws).

Kommentar hinzufügen

  • Remove the base.

  • Save the screws you took out of the bottom in a safe place. They will be needed to reattach the housing to the base.

  • Unscrew the two screws (10 mm Philips #2 screws) from the base.

  • Remove the base and set it aside for now.

Kommentar hinzufügen

  • Locate the power switch connected to the side of the housing.

  • Carefully pinch the sides of the power switch.

  • Push the power button up and out of the housing.

Kommentar hinzufügen

  • Now that the power switch is removed from the housing, you have to remove the wires connected to the power switch.

  • Use the plastic opening tool to gently pry the wires loose from the power switch.

  • The wires should pop easily out from the power switch.

Kommentar hinzufügen

  • Remove the power switch from the device.

  • You can now replace the power switch if necessary.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Dana Clarke

Mitglied seit 26.09.2012

26 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 16-57, Forte Fall 2012 Mitglied von Cal Poly, Team 16-57, Forte Fall 2012

CPSU-FORTE-F12S16G57

5 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 654