Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
If the device will not turn on or has a broken power switch, use this guide to replace the switch.
Was du brauchst
-
-
Flip the popper on its side.
-
Remove the screws on the bottom with the Phillips #2 phillips head screwdriver.
-
-
-
-
Remove the base.
-
Unscrew the two screws (10 mm Philips #2 screws) from the base.
-
Remove the base and set it aside for now.
-
-
-
Locate the power switch connected to the side of the housing.
-
Carefully pinch the sides of the power switch.
-
Push the power button up and out of the housing.
-
-
-
Now that the power switch is removed from the housing, you have to remove the wires connected to the power switch.
-
Use the plastic opening tool to gently pry the wires loose from the power switch.
-
-
-
Remove the power switch from the device.
-
You can now replace the power switch if necessary.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.