Einleitung
How to access and replace the motherboard. Be careful when taking off the back cover and make sure to carefully unplug all wires.
Was du brauchst
-
-
Turn the device screen side down.
-
Carefully remove the back piece with the iFixit opening tool.
-
-
-
Pull the camera plug upward and away from the motherboard with your fingers.
-
Gently pull the camera from the device. The camera is held by tension.
-
-
-
-
Remove speakers gently using your fingers, they pop out easily.
-
Disconnect cords attached to the speaker from white pod.
-
-
-
Disconnect the press-fit black and red curly wire from where it connects on the motherboard.
-
-
-
Gently remove the battery's three ZIF connectors from the motherboard. Use your fingers.
-
-
-
Disconnect the battery's bundled cable connector from the motherboard with fingers.
-
-
-
Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S1-G5, Leahy Spring 2019 Mitglied von USF Tampa, Team S1-G5, Leahy Spring 2019
USFT-LEAHY-S19S1G5
5 Mitglieder
6 Anleitungen geschrieben
