Einleitung
Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.
Was du brauchst
-
-
Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).
-
2 of the screws will be star shaped rather than phillips head.
-
Remove the base plate.
-
-
-
-
Identify the red and black wires topped with white-clear caps.
-
Use pliers to squeeze the flattened part of both caps.
-
The black and red wires attached to the power cord should be loose and ready to pull out.
-
-
-
Replace the cord by slipping the new cord's black and red wires into the caps.
-
Pinch the middle of the cap back to the flattened position using the pliers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
Cal Poly, Team S7-G1, Banghart Fall 2017 Mitglied von Cal Poly, Team S7-G1, Banghart Fall 2017
CPSU-BANGHART-F17S7G1
5 Mitglieder
6 Anleitungen geschrieben
2 Kommentare
Como puedo extraer la parte donde sienta el vaso de mi licuadora ninja ct641
Como puedo extraer la base donde asienta el vaso de licuadora ninja ct641
