Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Unscrew the 7 6.4mm T5 Torx screws from back panel
-
Use spudger to separate front and back panels
-
-
-
The green grill is not screwed in so it can be pulled right out.
-
-
-
-
Remove the 6 6.5mm T5 Torx screws.
-
Remove power wires.
-
Peel back copper tape and remove black and white wires.
-
-
-
Once all cables are removed, pull the battery apparatus out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
5 weitere Nutzer:innen haben diese Anleitung absolviert.
4 Kommentare
The original cells are rated for 3.7v, 2450mAh, and I don't know how many amps but it's probably not that many. The form factor is flat-top 18650. I successfully did this repair using 3 Samsung 35E cells: https://www.18650batterystore.com/produc...
So, is this battery pack compatible? I read it has the connector in the wrong side