Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the 2 screws from the bottom of the camera
    • Remove the 2 screws from the bottom of the camera

    Kommentar hinzufügen

  2. Remove the screw from the right side of the camera.
    • Remove the screw from the right side of the camera.

    Kommentar hinzufügen

    • Remove the two screws from the left side of the camera

    Kommentar hinzufügen

    • Separate the front casing from the back using a plastic opening tool, gently.

    • Silver band and buttons will become loose when you remove the two pieces.

    Kommentar hinzufügen

    • Pull the silver bracket and buttons off of the camera

    Kommentar hinzufügen

    • Remove the 2 screws on the right side of the camera.

    • Remove the 2 screws on the left side of the camera.

    • Circuit ribbon is attached at the top-left of the camera. Be careful when separating the front and back of the camera.

    • Pull the camera apart into 2 separate pieces.

    Kommentar hinzufügen

    • Flip up clip on circuit ribbon, carefully

    • Detach the ribbon from the rear to the front and pull it out, gently.

    Kommentar hinzufügen

    • You will be left with four major pieces

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tracy Donovan

Mitglied seit 10.02.2012

13 Reputation

1 Anleitung geschrieben

Team

James Madison, Team 3-3, Klein Spring 2012 Mitglied von James Madison, Team 3-3, Klein Spring 2012

JMU-KLEIN-S12S3G3

4 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 378