Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will show you how to remove the camera's power button so you can replace it if it is not working.
Was du brauchst
-
-
Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.
-
-
-
Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.
-
-
-
Use the plastic opening tools and your fingers to pry the front plate from the camera.
-
-
-
-
Flip the silver panel over. The power button is the smaller button covered by a metal backing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.