Zum Hauptinhalt wechseln

Einleitung

This guide will allow you to remove the screen from the inside of the device in order to clean it or replace it. The screen on a device can easily crack. This repair is easy to do and does not require any special tools.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Onda V701 Screen Replacement, Back Panel: Schritt 1, Bild 1 von 3 Onda V701 Screen Replacement, Back Panel: Schritt 1, Bild 2 von 3 Onda V701 Screen Replacement, Back Panel: Schritt 1, Bild 3 von 3
    • Ensure device is powered off before disassembly.

    • Remove the 4 rubber screw plugs using a spudger.

  2. Onda V701 Screen Replacement: Schritt 2, Bild 1 von 3 Onda V701 Screen Replacement: Schritt 2, Bild 2 von 3 Onda V701 Screen Replacement: Schritt 2, Bild 3 von 3
    • Remove the four 4.8mm mounting screws using a PH00 screwdriver.

  3. Onda V701 Screen Replacement: Schritt 3, Bild 1 von 2 Onda V701 Screen Replacement: Schritt 3, Bild 2 von 2
    • Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.

    • Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

  4. Onda V701 Screen Replacement: Schritt 4, Bild 1 von 2 Onda V701 Screen Replacement: Schritt 4, Bild 2 von 2
    • Gently lift the screen assembly away from the back cover assembly.

    • Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

  5. Onda V701 Screen Replacement: Schritt 5, Bild 1 von 3 Onda V701 Screen Replacement: Schritt 5, Bild 2 von 3 Onda V701 Screen Replacement: Schritt 5, Bild 3 von 3
    • Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.

    • Remove the ribbon cables.

  6. Onda V701 Screen Replacement, Screen: Schritt 6, Bild 1 von 3 Onda V701 Screen Replacement, Screen: Schritt 6, Bild 2 von 3 Onda V701 Screen Replacement, Screen: Schritt 6, Bild 3 von 3
    • Remove all 14 of the 3.6mm screws using a PH00 screwdriver.

  7. Onda V701 Screen Replacement: Schritt 7, Bild 1 von 3 Onda V701 Screen Replacement: Schritt 7, Bild 2 von 3 Onda V701 Screen Replacement: Schritt 7, Bild 3 von 3
    • Gently separate the screen from the plastic border/screen holder by pulling it off with your hands.

  8. Onda V701 Screen Replacement: Schritt 8, Bild 1 von 3 Onda V701 Screen Replacement: Schritt 8, Bild 2 von 3 Onda V701 Screen Replacement: Schritt 8, Bild 3 von 3
    • Remove the grey monitor from the glass screen cover by gently lifting it up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Colorado Springs, Team 4-6, Panko Spring 2015 Mitglied von Colorado Springs, Team 4-6, Panko Spring 2015

UCCS-PANKO-S15S4G6

3 Mitglieder

10 Anleitungen geschrieben

Ein Kommentar

بدي من هي الشاشة وين بلاقي

abdurrhman khrrat - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 2

Insgesamt: 406