Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Use this guide to remove the light bulb from your Optoma HD20.
Was du brauchst
-
-
Use a Phillips #1 screwdriver to loosen the screws circled on the bottom of the device.
-
-
-
Loosen the two screws holding the black casing down with a Phillips #1 screwdriver.
-
-
-
-
Carefully pull out the light bulb insulator once the screws have been removed so you do not break it.
-
-
-
Remove the 4 screws using a Phillips #1 screwdriver to remove the final casing around the bulb.
-
-
-
Pull the casing off and the gently pull out the light bulb. Then replace the bulb with your new light bulb.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Nutzer:innen haben diese Anleitung absolviert.
5 Kommentare
king@okinlamps.com
Need LAD60 20PCS
The manual says the new light won’t come back on until a lamp reset I’d done via menu , but how can you see the text if the light isn’t on?????