Zum Hauptinhalt wechseln

PDP Afterglow Wired Xbox 360 Controller Case Replacement

Was du brauchst

  1. PDP Afterglow Wired Xbox 360 Controller Case Replacement, Case: Schritt 1, Bild 1 von 2 PDP Afterglow Wired Xbox 360 Controller Case Replacement, Case: Schritt 1, Bild 2 von 2
    • Loosen the seven 11 mm Phillips #0 screws located on the back of the controller.

  2. PDP Afterglow Wired Xbox 360 Controller Case Replacement: Schritt 2, Bild 1 von 1
    • Using a plastic opening tool, pry the back cover from the front.

    • The covers should separate without needing a plastic opening tool, but in some cases you may need to use it.

  3. PDP Afterglow Wired Xbox 360 Controller Case Replacement: Schritt 3, Bild 1 von 1
    • Remove the top cover from the bottom and place next to each other.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aaron

Mitglied seit: 09/14/15

103 Reputation

1 Anleitung geschrieben

Team

IUPUI, Team 3-1, Harley Fall 2015 Mitglied von IUPUI, Team 3-1, Harley Fall 2015

IUPUI-HARLEY-F15S3G1

4 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 11

Insgesamt: 1,289