Zum Hauptinhalt wechseln

Einleitung

Steps for replacing the outer casing of a Sony PSP-3000.

  1. PSP 300x Casing Replacement, Battery: Schritt 1, Bild 1 von 3 PSP 300x Casing Replacement, Battery: Schritt 1, Bild 2 von 3 PSP 300x Casing Replacement, Battery: Schritt 1, Bild 3 von 3
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

  2. PSP 300x Casing Replacement, Casing: Schritt 2, Bild 1 von 1
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

  3. PSP 300x Casing Replacement: Schritt 3, Bild 1 von 2 PSP 300x Casing Replacement: Schritt 3, Bild 2 von 2
    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

  4. PSP 300x Casing Replacement: Schritt 4, Bild 1 von 1
    • Next, unscrew the two screws located at the top of the PSP.

  5. PSP 300x Casing Replacement: Schritt 5, Bild 1 von 1
    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

  6. PSP 300x Casing Replacement: Schritt 6, Bild 1 von 2 PSP 300x Casing Replacement: Schritt 6, Bild 2 von 2
    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

Abschluss

To reassemble your device, follow these instructions in reverse order.

22 weitere Nutzer haben diese Anleitung absolviert.

kbrunner

Mitglied seit: 05.11.2009

57 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 19-2, Maness Fall 2009 Mitglied von Cal Poly, Team 19-2, Maness Fall 2009

CPSU-MANESS-F09S19G2

3 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 4

Letzten 7 Tage: 30

Letzten 30 Tage: 135

Insgesamt: 12,047