Zum Hauptinhalt wechseln

Einleitung

Replace the speaker

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. iPhone Akku Fix Kits

    Nur $29.99

    Buy Now

    iPhone Akku Fix Kits

    Nur $29.99

    Buy Now
  4. Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  5. Using the spudger, pull the speaker straight up.
    • Using the spudger, pull the speaker straight up.

  6. Gently pull the rubber coating off of the speaker.
    • Gently pull the rubber coating off of the speaker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Mitglied seit: 26.01.2010

24 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 13-23, Maness Winter 2010 Mitglied von Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Mitglieder

16 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,456