Zum Hauptinhalt wechseln

Einleitung

This is a guide that indicates how to replace a faulty microphone for the Palm Treo 680.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the battery cover by pressing on the small rectangular button located on the back of the phone. Remove the battery cover by pressing on the small rectangular button located on the back of the phone.
    • Remove the battery cover by pressing on the small rectangular button located on the back of the phone.

  2. Remove the battery by pulling it out towards you.
    • Remove the battery by pulling it out towards you.

  3. Remove the stylus in order to access the screw. Unscrew the 0.266 inch top-left screw using a T6 Torx screwdriver.
    • Remove the stylus in order to access the screw.

    • Unscrew the 0.266 inch top-left screw using a T6 Torx screwdriver.

  4. Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner. Unscrew the 0.266 inch screw using the T6 Torx screwdriver.
    • Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.

    • Unscrew the 0.266 inch screw using the T6 Torx screwdriver.

    • If there is a red Palm sticker covering this screw, puncture it to access the screw.

  5. Remove the remaining two 0.266 inch screws at the bottom using the T6 screwdriver.
    • Remove the remaining two 0.266 inch screws at the bottom using the T6 screwdriver.

  6. Turn the phone so the screen is facing the right side. Use a spudger to carefully separate the back panel from the front panel to access components inside the phone. Separate the covers from the left side of the device as indicated in the picture.
    • Turn the phone so the screen is facing the right side.

    • Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.

    • Separate the covers from the left side of the device as indicated in the picture.

    • The right side contains orange ribbons that are easily damaged.

  7. Using a pair of tweezers, grasp the blue rubber microphone. Pull the rubber microphone up and back to remove it.
    • Using a pair of tweezers, grasp the blue rubber microphone.

    • Pull the rubber microphone up and back to remove it.

    • Now you have successfully removed the microphone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Maiya123

Mitglied seit: 22.10.2009

51 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 6-4, Maness Fall 2009 Mitglied von Cal Poly, Team 6-4, Maness Fall 2009

CPSU-MANESS-F09S6G4

4 Mitglieder

12 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 4,030