1. Press the button located just above the Sprint™ logo and then slide the cover down.
    • Press the button located just above the Sprint™ logo and then slide the cover down.

    Kommentar hinzufügen

  2. Use the small notch on the left hand side of the phone to remove the battery.
    • Use the small notch on the left hand side of the phone to remove the battery.

    Kommentar hinzufügen

    • Remove the stylus from the phone.

    Kommentar hinzufügen

    • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

    Kommentar hinzufügen

    • Using the spudger, remove the small rubberized patch under the antenna.

    Kommentar hinzufügen

    • Unscrew the last two screws using the previous screw driver.

    Kommentar hinzufügen

    • Using the plastic opening tool, gently separate the back case from the phone body.

    Kommentar hinzufügen

    • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

    Kommentar hinzufügen

    • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

    • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

    Kommentar hinzufügen

    • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

    • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

    Kommentar hinzufügen

    • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

    • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

    Kommentar hinzufügen

    • Once the motherboard is removed, the LCD should be resting on the front case of the phone.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Lucas

Mitglied seit 17.04.2012

14 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 12-37, Regan Spring 2012 Mitglied von Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 663