Einleitung

Follow this guide to gain access to your Treo's motherboard.

Ersatzteile

Kein Ersatzteil erforderlich.

Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Kommentar hinzufügen

Use the small notch on the left hand side of the phone to remove the battery. Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Kommentar hinzufügen

Remove the stylus from the phone.
  • Remove the stylus from the phone.

Kommentar hinzufügen

After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)
  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

Kommentar hinzufügen

Using the spudger, remove the small rubberized patch under the antenna.
  • Using the spudger, remove the small rubberized patch under the antenna.

Kommentar hinzufügen

Unscrew the last two screws using the previous screw driver.
  • Unscrew the last two screws using the previous screw driver.

Kommentar hinzufügen

Using the plastic opening tool, gently separate the back case from the phone body. Using the plastic opening tool, gently separate the back case from the phone body.
  • Using the plastic opening tool, gently separate the back case from the phone body.

Kommentar hinzufügen

Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3). Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3). Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).
  • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

Kommentar hinzufügen

Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1). Once unscrewed, gently detach the antenna chip with your hands (Picture 2). Once unscrewed, gently detach the antenna chip with your hands (Picture 2).
  • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

  • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

Kommentar hinzufügen

Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1). Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).
  • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

  • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

Kommentar hinzufügen

To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2). Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3). Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).
  • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

  • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ivan

Mitglied seit 29.04.2012

11 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 12-37, Regan Spring 2012 Mitglied von Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 685