Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Palm m105 case replacment

Was du brauchst

  1. Palm m105 case replacment, Palm m105 case replacment: Schritt 1, Bild 1 von 1
    • Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.

  2. Palm m105 case replacment: Schritt 2, Bild 1 von 1
    • Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.

  3. Palm m105 case replacment: Schritt 3, Bild 1 von 1
    • Remove the batteries by opening the battery compartment on the back of the device. Remove one battery at a time.

  4. Palm m105 case replacment: Schritt 4, Bild 1 von 2 Palm m105 case replacment: Schritt 4, Bild 2 von 2
    • Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here.

  5. Palm m105 case replacment: Schritt 5, Bild 1 von 3 Palm m105 case replacment: Schritt 5, Bild 2 von 3 Palm m105 case replacment: Schritt 5, Bild 3 von 3
    • Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device.

  6. Palm m105 case replacment: Schritt 6, Bild 1 von 1
Abschluss

To reassemble your device, follow these instructions in reverse order.

Travis

Mitglied seit: 10/04/11

4 Reputation

1 Anleitung geschrieben

Team

UW Stout, Team 1-3, Zhou Fall 2011 Mitglied von UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 5

Insgesamt: 771