Zum Hauptinhalt wechseln

Einleitung

Once the back cover has been removed, removing the antenna is as simple as unscrewing one screw.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Orient the phone so that the phone model and other descriptive information is facing upward. Locate the two silver screws near the hinge where the battery is housed.
    • Orient the phone so that the phone model and other descriptive information is facing upward.

    • Locate the two silver screws near the hinge where the battery is housed.

    • Remove the silver screws using a Phillips head #2 screwdriver.

  2. Pull off the back panel of the phone. Make sure you pull the cover off carefully in order to prevent damage to the back cover. Make sure you pull the cover off carefully in order to prevent damage to the back cover.
    • Pull off the back panel of the phone.

    • Make sure you pull the cover off carefully in order to prevent damage to the back cover.

  3. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  4. Find the silver screw located in the red circle. Using a Philips head #2 screwdriver, remove the screw holding the antenna in place.
    • Find the silver screw located in the red circle.

    • Using a Philips head #2 screwdriver, remove the screw holding the antenna in place.

  5. Press the release button. The release button is located in the red circle in the image to the left.
    • Press the release button.

    • The release button is located in the red circle in the image to the left.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Elizabeth Kelly

Mitglied seit: 22.10.2012

501 Reputation

5 Anleitungen geschrieben

Team

Clemson, Team 15-1, Benson Fall 2012 Mitglied von Clemson, Team 15-1, Benson Fall 2012

CLEM-BENSON-F12S15G1

4 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 10

Insgesamt: 1,389