Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Use this guide to replace the back cover which houses the back panel buttons and LCD screen.
Was du brauchst
-
-
Remove the following eleven screws securing the covers to the ZS3
-
Eleven 3 mm Phillips screws
-
-
-
Use the flat end of a spudger to pry apart the back cover from the rest of the unit as shown.
-
-
-
-
Using your fingernail or a spudger, flip up the ZIF locking flap on the two LCD ribbon cable sockets that connect the back cover to the rest of the unit.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.