Einleitung

Use this guide to replace the camera's battery.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Locate the small, hinged door on the bottom of the camera.
    • Locate the small, hinged door on the bottom of the camera.

  2. Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).
    • Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).

    • The hinged door should swing open after unlocking.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.
    • Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.

    • This should release the battery.

  5. Pull the battery out of the camera. The battery should slide out easily.
    • Pull the battery out of the camera.

    • The battery should slide out easily.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 13-60, Johann Spring 2013 Mitglied von Cal Poly, Team 13-60, Johann Spring 2013

CPSU-JOHANN-S13S13G60

3 Mitglieder

5 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 862