Einleitung

This guide will teach you step by step on how to replace broken or malfunctioning LCD screens.

  1. Remove the battery and SD card
    • Remove the battery and SD card

    Kommentar hinzufügen

  2. Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver
    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver

    Kommentar hinzufügen

    • Carefully separate the back of the camera from the main body

    • Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged

    Kommentar hinzufügen

    • Use the tip of the 2.0 mm flathead screwdriver to flip up the black tabs on the ribbon cables

    • Pull gently on the ribbon cables to unseat them

    Kommentar hinzufügen

    • Use the tip of the 2.0 mm flathead to flip up the metal tabs

    • Carefully lift the LCD panel out of place

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Derrick Thompson

Mitglied seit 30.01.2018

1.035 Reputation

5 Anleitungen geschrieben

Team

Baylor, Team S2-G5, Johnson Spring 2018 Mitglied von Baylor, Team S2-G5, Johnson Spring 2018

BU-JOHNSON-S18S2G5

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 44