Zum Hauptinhalt wechseln

Einleitung

The Pentax Optio WG-2 uses SD memory cards. If your screen is not displaying anything, a faulty memory card may be the issue. Use this guide to replace the memory card of your Pentax Optio WG-2.

  1. Make sure the camera is turned off before removing or inserting the SD Memory Card. Press the lock lever (small tab) in an upward direction towards the word open. Slide the cover away from the camera.
    • Make sure the camera is turned off before removing or inserting the SD Memory Card.

    • Press the lock lever (small tab) in an upward direction towards the word open.

    • Slide the cover away from the camera.

    • Lift the cover up to gain access to the memory card.

  2. To remove the SD Memory Card, push it in once and then pull it out. To remove the SD Memory Card, push it in once and then pull it out.
    • To remove the SD Memory Card, push it in once and then pull it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Chris Gudiel

Mitglied seit: 19.02.2017

102 Reputation

1 Anleitung geschrieben

Team

USF Tampa, Team 1-4, Sullivan Spring 2017 Mitglied von USF Tampa, Team 1-4, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G4

4 Mitglieder

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 186