Zum Hauptinhalt wechseln

Pentax Optio WG-2 Shutter and Power Button Replacement

Was du brauchst

  1. Pentax Optio WG-2 Shutter and Power Button Replacement, Shutter and Power Button: Schritt 1, Bild 1 von 1
    • Use your finger to peel the grip off the top of the camera.

    • For best results, start from the right side of the camera, opposite from the buttons.

    • Once the grip is removed, you will most likely lose the water-tight seal.

  2. Pentax Optio WG-2 Shutter and Power Button Replacement: Schritt 2, Bild 1 von 1
    • Use the tweezers to remove the two buttons from the top of the camera.

    • The buttons may fall out while removing the grip.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

UMass Dartmouth, Team 6-7, Bhusal Spring 2016 Mitglied von UMass Dartmouth, Team 6-7, Bhusal Spring 2016

UMASSD-BHUSAL-S16S6G7

3 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 220