Philips Sonicare DiamondClean Metal Brush Connector Replacement

Pull the head from toothbrush.

Use a nylon spudger to pry the chrome cap at the bottom off.

Use a nylon spudger to release the black tabs on either side of internals.

Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out.

Use a Phillips screwdriver to remove the screw at the base of the metal head.

Use fine tip tweezers to push the white plastic tabs in to release the head from the innards.

Gently pull the metal head from the innards.