Zum Hauptinhalt wechseln

Einleitung

Use this guide to open up your speaker and remove and replace different components under the front panel.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Before continuing, be sure your device is powered off.
    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Peel back the rubber feet from either side of the base.
    • Peel back the rubber feet from either side of the base.

  3. Remove four 9mm Phillips #0 head screws from the bottom of the speaker.
    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. Separate the base of the speaker from the upper housing.
    • Separate the base of the speaker from the upper housing.

  5. Remove four 9mm Phillips #0 head screws from the inside of the speaker case.
    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard.
    • Remove all cable connectors from the speaker motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

David Lennon

Mitglied seit: 14.04.2015

9.542 Reputation

10 Anleitungen geschrieben

Team

Cal Poly, Team 4-5, Maness Spring 2015 Mitglied von Cal Poly, Team 4-5, Maness Spring 2015

CPSU-MANESS-S15S4G5

4 Mitglieder

29 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 4

Insgesamt: 363