Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Planet Eclipse Etha Battery and Grip Panels Replacement

Was du brauchst

  1. Planet Eclipse Etha Battery and Grip Panels Replacement, Battery and Grip Panels: Schritt 1, Bild 1 von 2 Planet Eclipse Etha Battery and Grip Panels Replacement, Battery and Grip Panels: Schritt 1, Bild 2 von 2
    • Use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

    • If you are only replacing the battery, skip the next step.

    • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

  2. Planet Eclipse Etha Battery and Grip Panels Replacement: Schritt 2, Bild 1 von 1
    • Flip the marker over and use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

  3. Planet Eclipse Etha Battery and Grip Panels Replacement: Schritt 3, Bild 1 von 2 Planet Eclipse Etha Battery and Grip Panels Replacement: Schritt 3, Bild 2 von 2
    • Carefully remove the 9V battery and connector.

    • Remove the 9V battery from the connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Jared Olson

Mitglied seit: 10/14/14

211 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 10-42, Amido Fall 2014 Mitglied von Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 8

Insgesamt: 1,190