1. Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console. Caution with the "Do not void" seal, underneath is also a screw Caution with the "Do not void" seal, underneath is also a screw
    • Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.

    • Caution with the "Do not void" seal, underneath is also a screw

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. If all screws are removed. Use a metal spunger to open the chassis
    • If all screws are removed.

    • Use a metal spunger to open the chassis

  4. Slip the three cables out of the sockets. Use a PH01 screwdriver to remove the four screws securing the optical drive Lift up the optical drive and remove the duct tape under the flex cable.
    • Slip the three cables out of the sockets.

    • Use a PH01 screwdriver to remove the four screws securing the optical drive

    • Lift up the optical drive and remove the duct tape under the flex cable.

    • Now the optical drive is free and ready for replacement

Abschluss

To reassemble your device, follow these instructions in reverse order.

11 weitere Nutzer haben diese Anleitung absolviert.

tlroesner

Mitglied seit: 13.05.2012

1.788 Reputation

4 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 6

Letzte 7 Tage: 39

Letzte 30 Tage: 102

Insgesamt: 15,678