Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.
-
-
-
-
Slip the three cables out of the sockets.
-
Use a PH01 screwdriver to remove the four screws securing the optical drive
-
Lift up the optical drive and remove the duct tape under the flex cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
16 weitere Nutzer:innen haben diese Anleitung absolviert.
3 Kommentare
How is it that this guide says difficult and the other PS2 drive replacement on here says easy?
it really depends on your level of skill/experience.