Zum Hauptinhalt wechseln

PlayStation 3 Netzteil austauschen

Was du brauchst

  1. PlayStation 3 Netzteil austauschen, Abdeckung: Schritt 1, Bild 1 von 2 PlayStation 3 Netzteil austauschen, Abdeckung: Schritt 1, Bild 2 von 2
    • Entferne mit der Spitze eines Spudgers den schwarzen Gummi-Schraubdeckel von der Seite der PS3.

    • Die Schrauben-Abdeckung kann unter einem Garantie-Aufkleber sein. Dieser Aufkleber wird nach dem Entfernen sein Aussehen ändern und "VOID" (Ungültig) anzeigen.

    Fake repair. Real fault: How to Delid and fix the Yellow Light of Death for good (NEC TOKIN Replacement) https://gbatemp.net/threads/how-to-delid...

    Player - Antwort

  2. PlayStation 3 Netzteil austauschen: Schritt 2, Bild 1 von 1
    • Entferne die 8,5 mm TR10 Torx Security Schraube von der Abdeckung.

    How to Delid and fix the Yellow Light of Death for good (NEC TOKIN Replacement) https://gbatemp.net/threads/how-to-delid...

    Player - Antwort

    I need a tork screw bracket / holder A/E/B/E01- MG and security torx screw for a CECH-AO1 do u guys sell these?

    vuhx - Antwort

  3. PlayStation 3 Netzteil austauschen: Schritt 3, Bild 1 von 3 PlayStation 3 Netzteil austauschen: Schritt 3, Bild 2 von 3 PlayStation 3 Netzteil austauschen: Schritt 3, Bild 3 von 3
    • Ziehe die Abdeckung in Richtung des Festplattenschachts, dann hebe sie vom Körper der PS3 ab.

    How to Delid and fix the Yellow Light of Death for good (NEC TOKIN Replacement) https://gbatemp.net/threads/how-to-delid...

    Player - Antwort

  4. PlayStation 3 Netzteil austauschen: Schritt 4, Bild 1 von 1
    • Achte auf den kleinen Metallbügel, der lose in der oberen Abdeckung gehalten wird.

    That small metal bracket/socket set up looks completely different in the ps3 I'm working on. Model: CECHK01.

    Any suggestions?

    Marcus - Antwort

    different in mine too, Model: CECHP01

    Link Adrian - Antwort

    mine does not have one at all

    ian.downard01 - Antwort

    1How to Delid and fix the Yellow Light of Death for good (NEC TOKIN Replacement) https://gbatemp.net/threads/how-to-delid...

    Player - Antwort

    Did not find in my CECHH01

    Philippe Morin - Antwort

    I don’t have this bracket, where I can get it ?

    Paul Bidny - Antwort

  5. PlayStation 3 Netzteil austauschen, Obere Abdeckung: Schritt 5, Bild 1 von 1
    • Entferne die folgenden sieben Schrauben:

    • Sechs 52 mm Kreuzschlitzschrauben

    • Eine 30 mm Kreuzschlitzschraube

    2 more smaller screws (don't know what size...small) just below the top middle screw and top right screw (in the picture). Look for the arrows...

    E Goo - Antwort

    can confirm, might be the backwards compatibles only

    Jordan Giese -

    after you remove the screws, you may have to push a tab to take the cover off if you meet resistance on one side of the cover. Here is a link to a video that explains it, saved me lots of trouble:

    http://youtu.be/jZgekNsRB-A?t=1m54s

    ericksi33 - Antwort

    Thanks @ericksi33, this really helped me out.

    hogurt -

    1st attempt, fan loud. Ps3 lasted about 2 wks. 2nd attempt noticed very poor contact between heatsink & cpu,gpu when taking it apart. Research - Found a better way to apply thermal past. I personally disapprove of guide on this. A small bit about the size of a grain of rice in center of cpu is plenty. Clamp the heat sinks back on. Then take it apart & check contact area. Thermal paste should have spread to about the size of a quarter.(more is better. Less then a nickel size is poor contact) possibly weak clamps. Carefully applied pressure onto the cpu & gpu, pressing them into the heatsinks before clamping heatsink clamps on. Achieved greater then quarter sized thermal past spread. Fan silent in comparison & ps3 lasted about a yr. Rarely did I ever hear the fan go to high and get loud after that. About to begin my third fix on this same ps3. One of the first 80g backwards compatible. other then those notes and that this guide was for a different model ps3 (minor differences) I liked this guide. easy to follow.

    brettgomes - Antwort

    Although the battery is described as proprietary, it looks like it is the common CR2032 lithium coin battery that is used in calculators and some computers. I haven't had to replace mine but I suspect under the heatshrink cover is a battery holder which will allow the coin battery to be removed and replaced. Then wrap with electrical tape and reinstall.

    RickP - Antwort

    I tried this with the heatgun and it ruined my PS3. The CPU and GPU are NOW RUINED!!! It did not work for and made things worst!!! I sent it to a place to get reballed and they said the HEATGUN had overheated my processor and killed them!!! So think twice about doing this. Just because it is already broken, DON'T THINK YOU CAN'T MAKE IT WORST!

    georgehollyoh - Antwort

    Why would you try it with a heat gun, no were is it mentioned to do that

    Phillip Pereira -

    There are 2 additional screws to remove , front center and front left , just behind the already marked screws.

    mikentc90 - Antwort

    As mentioned and I’ll add so detail too. If you have a model with the card readers there are two more small screws that also need to be removed before moving on to the next step.

    screech - Antwort

    2How to Delid and fix the Yellow Light of Death for good (NEC TOKIN Replacement) https://gbatemp.net/threads/how-to-delid...

    Player - Antwort

    I felt more comfortable with #2 screwdrivers.

    Philippe Morin - Antwort

  6. PlayStation 3 Netzteil austauschen: Schritt 6, Bild 1 von 1
    • Hebe die obere Abdeckung von der Hinterkante und drehe sie in Richtung der Vorderseite der PS3.

    • Entferne die obere Abdeckung.

    • Hinten rechts in der Ecke befindet sich ein kleiner Plastikhaken. Löse diesen vorsichtig, indem du mit einem Spudger durch die Öffnung dagegen drückst.

    Disconnect the memory card ribbon cable.

    Tobias Stockmann - Antwort

    The top would hardly budge on the left back corner and was stuck on the right back corner. There is a plastic hook that needs to be unfastened to lift the top off. It is located in a hole on the top back corner on the right hand side, so the corner straight across the on off button. Just gently push the plastic hook a bit front the rear of the machine with a spudger. It gives easily and the top will be free to lift off after that.

    cornellg - Antwort

    I can confirm on CECHH01.

    Philippe Morin -

    Some more details here as well.

    The newer model without SACD support appears to have added that clip to the back right that needs to be pressed to release the top shell.

    If equipped with the card reader you can either have to disconnect the ribbon cable or unclip the reader from the top shell after lifting it up to get finger or tool in there to push clip to side and release reader from top shell. Note: if you failed to remove the card reader screws in the previous step these clips can break.

    screech - Antwort

    The original 60GB with the CF card reader on the front has a button protruding out. This will make it difficult to remove the top. You need to unscrew the memory card reader so it can come out easily.

    Brian Caines - Antwort

    Wow, this needs more attention. This isn't explained in any disassembly guide I've seen. You also need to be cognizant of the card reader cable when you're lifting off the lid.

    SolidSonicTH -

    I didn't have trouble during disassembly, but reassembly was tough. I loosened the card reader screws by 1 turn and used a small gauge wire to lasso the button and ran it through the CF hole.

    Carl Garner -

  7. PlayStation 3 Netzteil austauschen, Speicherkartenleser: Schritt 7, Bild 1 von 1
    • Entferne die beiden 9 mm Kreuzschlitzschrauben, die den Speicher-Kartenleser am Rahmen befestigen.

  8. PlayStation 3 Netzteil austauschen: Schritt 8, Bild 1 von 2 PlayStation 3 Netzteil austauschen: Schritt 8, Bild 2 von 2
    • Hebe den Speicher-Kartenleser weit genug aus der PS3, um an die Kabel zu gelangen,

    • Löse vorsichtig die Halteklappe am Anschluss des Flachbandkabels des Speicher-Kartenlesers.

    • Achte darauf, dass du an der Halteklappe hebelst und nicht am Anschluss selbst!

    • Ziehe das Flachbandkabel aus seinem Anschluss.

    • Jetzt kannst du den Speicher-Kartenleser aus der PS3 entfernen.

    it isn't necessary to disconnect this.

    burkken - Antwort

  9. PlayStation 3 Netzteil austauschen, Netzteil: Schritt 9, Bild 1 von 1
    • Ziehe die Kabel der Gleichstromversorgung zur Vorderseite der PS3 hin und trenne sie vom Netzteil ab.

  10. PlayStation 3 Netzteil austauschen: Schritt 10, Bild 1 von 1
    • Hebe die Netzkabel etwas von der Rückabdeckung weg, damit du freien Zugang zum Stecker hast.

  11. PlayStation 3 Netzteil austauschen: Schritt 11, Bild 1 von 1
    • Drücke die Verriegelung nach unten und ziehe gleichzeitig den Netzstecker aus seinem Anschluss auf dem Netzteil heraus.

  12. PlayStation 3 Netzteil austauschen: Schritt 12, Bild 1 von 1
    • Entferne die fünf 9 mm Kreuzschlitzschrauben, mit denen das Netzteil am Rahmen befestigt ist.

  13. PlayStation 3 Netzteil austauschen: Schritt 13, Bild 1 von 1
    • Hebe das Netzteil an der Vorderkante hoch, so dass es sich aus den Stiften auf der Hauptplatine löst.

    • Entferne das Netzteil.

Abschluss

Um dein Gerät wieder zusammenbauen, folge den Schritten in umgekehrter Reihenfolge.

47 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

6 Kommentare

This is for the 60gb version. As there is no card reader in the 80gb i replaced the power supply in and some of the psu screws were in a slightly different place. But a very good guide.

Craig Taylor - Antwort

I have a Ps3 that was bought in America. The power supply is different to ours here in South Africa (Cape Town). A friend who gave me the Ps3 also had an external power supply built so that it can be used here. It's been working for years but now I have that green light thingy going. I've removed the disc that was in it and thought it may have been inserted incorrectly. Now that I have seen your tutorial I will definitely check if it's the power supply or mother board. Thank you.

patrickms - Antwort

CAN I HAVE THE MANUAL MY RED LIGHT IS ON ALSO DIRECT ME TO A GOOD PLACE FOR REPAIRS IN ACCRA GHANA EMAIL honmante54@yahoo.com thank you

honmante54 - Antwort

why do your consoles have this red light on why do something about it

honmante54 - Antwort

I have a ps3 but it's the CECHL but it has no card

kajussls121 - Antwort

Hi I need a good fix store in Greece for ps3 in order to replace my power supply

Manos Kallimanis - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 10

Letzte 7 Tage: 95

Letzte 30 Tage: 438

Insgesamt: 107,464