Einleitung
Video tutorial - how to replace Laser Lens only:
Was du brauchst
Einführungsvideo
-
-
Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.
-
-
-
-
Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.
-
-
-
Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.
-
-
-
Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.
-
Remove the Blu-ray drive from the PS3.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
20 weitere Nutzer:innen haben diese Anleitung absolviert.
5 Kommentare
yo vendo amigo = ivaramso@gmail.com para ventas