Zum Hauptinhalt wechseln

PlayStation 4 Lüfteraustausch

Was du brauchst

  1. PlayStation 4 Lüfteraustausch, Obere Abdeckung der Festplatte entfernen: Schritt 1, Bild 1 von 3 PlayStation 4 Lüfteraustausch, Obere Abdeckung der Festplatte entfernen: Schritt 1, Bild 2 von 3 PlayStation 4 Lüfteraustausch, Obere Abdeckung der Festplatte entfernen: Schritt 1, Bild 3 von 3
    • Fasse die PS4 mit beiden Händen am Spalt in der oberen Abdeckung an.

    • Drücke den glänzenden Teil des Deckels mit den Daumen zur Seite, bis er sich herauslöst.

    • Hebe den glänzenden Deckel hoch und entferne ihn von der PS4.

    I have a CUH-1102A version of this PS4.

    Would this teardown work for it?

    Cary B - Antwort

  2. PlayStation 4 Lüfteraustausch, Schraube am Festplatteneinschub entfernen: Schritt 2, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Schraube am Festplatteneinschub entfernen: Schritt 2, Bild 2 von 2
    • Entferne die einzelne 6,5 mm Kreuzschlitzschraube, mit der der Festplatteneinschub am Gehäuse befestigt ist.

  3. PlayStation 4 Lüfteraustausch, Festplatteneinschub entfernen: Schritt 3, Bild 1 von 3 PlayStation 4 Lüfteraustausch, Festplatteneinschub entfernen: Schritt 3, Bild 2 von 3 PlayStation 4 Lüfteraustausch, Festplatteneinschub entfernen: Schritt 3, Bild 3 von 3
    • Ziehe den Festplatteneinschub aus dem Gehäuse heraus.

    • Sei vorsichtig und lasse die Festplatte nicht fallen. Die Bauteile im Inneren sind empfindlich und können bei einem Sturz kaputt gehen.

    Can these take an SSD?

    Cary B - Antwort

  4. PlayStation 4 Lüfteraustausch, PS4 herumdrehen: Schritt 4, Bild 1 von 1
    • Drehe die PS4 um, so dass der Boden oben liegt und die Rückseite zu dir zeigt.

  5. PlayStation 4 Lüfteraustausch, Garantieaufkleber abziehen: Schritt 5, Bild 1 von 3 PlayStation 4 Lüfteraustausch, Garantieaufkleber abziehen: Schritt 5, Bild 2 von 3 PlayStation 4 Lüfteraustausch, Garantieaufkleber abziehen: Schritt 5, Bild 3 von 3
    • Ziehe die beiden Aufkleber in der Mitte der Rückseite mit einer Pinzette ab, so dass die beiden Gehäuseschrauben sichtbar werden.

  6. PlayStation 4 Lüfteraustausch, Schraubenabdeckungen aus Kunststoff entfernen: Schritt 6, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Schraubenabdeckungen aus Kunststoff entfernen: Schritt 6, Bild 2 von 2
    • Entferne behutsam mit einer Pinzette die Schraubenabdeckungen aus Kunststoff in jeder Ecke, so dass zwei weitere Schrauben sichtbar werden.

    What If my PS4 doesn't have the two screws on the side

    Michael Jimenez - Antwort

    I should imagine that plastic cover will come off?

    How did you go?

    Cary B -

  7. PlayStation 4 Lüfteraustausch, Gehäuseschrauben entfernen: Schritt 7, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Gehäuseschrauben entfernen: Schritt 7, Bild 2 von 2
    • Entferne die vier 7,2 mm Torx Sicherheitsschrauben von der Rückseite der PS4.

    I only have two screws, those in the middle of the console.

    Oscar Martinez - Antwort

    Have you removed the plastic covers mentioned in the previous step? That will expose the other two screws.

    Sam Omiotek -

    same, here. there are only the middle screws, no covers or screws on the sides. and it sits pretty tight

    Johannes Müller - Antwort

    turns out 12XX models are different. Look at this for reference: https://www.youtube.com/watch?v=Hpr0z0ve...

    Johannes Müller - Antwort

    This video guide is very useful, thank you. The disc drive itself is different than this ifixit guide too

    UnitedShoes -

    Yes there is slight variations between the first models, and the second gen and on models. I have an original and only has the two screws in the middle, removal of the cover remains the same.

    Mary Westphal - Antwort

  8. PlayStation 4 Lüfteraustausch, Gehäuseunterteil entfernen: Schritt 8, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Gehäuseunterteil entfernen: Schritt 8, Bild 2 von 2
    • Hebe das Gehäuseunterteil mit den Daumen hoch und entferne es von der PS4.

    • Das Gehäuseunterteil ist mit Rasten befestigt. Zum Ablösen musst du möglicherweise recht viel Kraft aufbringen.

    sur la version 2 de l ps4 fat il n'y a que les 2 vis du milieu. Comment défaire le boîtier ?

    nlvolle - Antwort

  9. PlayStation 4 Lüfteraustausch: Schritt 9, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 9, Bild 2 von 2
    • Ziehe das Versorgungskabel mit einer Pinzette gerade heraus und trenne das Netzteil von der Hauptplatine ab.

    • Wenn der Stecker festhängt, dann heble ihn behutsam mit einem Spudger heraus.

    This part looks dangerous. There should be a flag/warning not to destroy that cable yes?

    Shawn - Antwort

    I second Shawn's comment. That cable seems to be very fragile, and one of the wires snapped on mine while removing the cable. It wouldn't have bothered me so much, if it wasn't a pain to find a replacement for it.

    Matt Gaia - Antwort

    The tweezers used here, do not cut it. Not enough grip.

    I had to use a set of needle nose pliers to remove this.

    Cary B - Antwort

    Power supply connection stuck. I don't want to damage it

    Nick Alex - Antwort

    What you need to do here is be patient. Do not pull the wires. Get some fine nosed pliers, wiggle the white connector from left to right in small movements and edge it out slowly. You can also use your nails one finger at each edge of the white connector to do this.

    David Harkness - Antwort

    Its really hard but i managed it with both of the tweezers/pincers at the same time


    1. Keep in mind to pull not too hard on the wires and make step 2 and 3 simultaneously!

    2. the straigt and wider tweezer to pull the white connector itself
    (top and bottom grip)
    3. the small and angled tweezer to pull the wires carefully
    (as shown on the picture above)

    dinkelberg01 - Antwort

    Another option, is to remove the screws holding it down, leave the cable in place and lift it out carefully, revealing the other end of the connection. The hidden side of the connection wire is easier to get a handle on.

    Mary Westphal - Antwort

    I concur with David, some patience and a lot of wiggling did it for me despite the stubbornness of the connection. Does seem like this one varies a lot in how difficult it is to remove.

    hazelrat - Antwort

    My connector wouldn't budge no matter how much I wiggled it. I solved it by lifting the power supply out and disconnect the connector at the other end (mainboard end)

    _I_ - Antwort

  10. PlayStation 4 Lüfteraustausch, Netzteil entfernen: Schritt 10, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Netzteil entfernen: Schritt 10, Bild 2 von 2
    • Entferne drei 9,7 mm Torx Sicherheitsschrauben.

    • Entferne die beiden 41 mm Kreuzschlitzschrauben und Halterungen.

  11. PlayStation 4 Lüfteraustausch: Schritt 11, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 11, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 11, Bild 3 von 3
    • Hebe das Netzteil gerade nach oben aus der PS4 heraus.

    • An der linken Seite wird das Netzteil stark von Zinken festgehalten. Wahrscheinlich musst du es mehrfach probieren, bis es herauskommt.

    • Achte beim Zusammenbau darauf, dass die Zinken gut passen, drücke dann das Netzteil fest.

    How do you remove the battery wires? I’ve personally been wiggling it to no effect, is there a certain way i have to pull it out, and should i pull it out of the power supply or the console?

    Tubby - Antwort

    Retirar en vertical, derecho hacia arriba. Sino puedes doblar uno de los tornillos largos

    FabianCampos - Antwort

  12. PlayStation 4 Lüfteraustausch, WLAN-Antenne entfernen: Schritt 12, Bild 1 von 2 PlayStation 4 Lüfteraustausch, WLAN-Antenne entfernen: Schritt 12, Bild 2 von 2
    • Trenne das Kabel zur WLAN-Antenne mit der Spudgerspitze von der Hauptplatine ab.

    dumb question but I’m very new to this. when reconnecting the wifi antenna, does it just click back on? I'm hesitant to try this procedure if I need to solder anything since I have zero experience.

    cliodhna - Antwort

    Yup! Hold it in place and press straight down on top of it with your finger or a spudger. If you have any other cable/connector questions see this guide.

    Sam Omiotek -

    Heads up, you might have a black philips screw above the power connector. It fixes the motherboard and EMI shield on if you're dealing with an 1100 model.

    Dzmitry - Antwort

  13. PlayStation 4 Lüfteraustausch: Schritt 13, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 13, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 13, Bild 3 von 3
    • Fasse das Antennenkabel mit dem Finger oder einer Pinzette und hole es aus den Kabelführungen heraus.

  14. PlayStation 4 Lüfteraustausch: Schritt 14, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 14, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 14, Bild 3 von 3
    • Hole das Antennenkabel mit dem Finger oder einer Pinzette unter dem Kabel zum optischen Laufwerk hervor.

  15. PlayStation 4 Lüfteraustausch: Schritt 15, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 15, Bild 2 von 2
    • Entferne die 9,7 mm Torx Sicherheitsschraube, die die Antenne befestigt.

    This does not work on the newer 12 series

    raseemhassan123 - Antwort

    Thank you! I thought I was insane. I've been trying to figure out where the hell this thing goes and the seat for it is like an inch from the corner. It's driving me mental trying to figure out how to put this back on

    Leo Halliwell -

  16. PlayStation 4 Lüfteraustausch: Schritt 16, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 16, Bild 2 von 2
    • Entferne die WLAN-Antenne.

    When I’m connected to wifi it does good for awhile then it disconnects from the wifi and I can’t use the controller. I have to turn the game off and disconnect power source. Do you think the wifi antenna could be the problem or doin have another situation.

    Jay Pax - Antwort

    I would check the antenna connection to the motherboard, if it's properly seated I don't think it's the problem.

    hazelrat -

  17. PlayStation 4 Lüfteraustausch, Optisches Laufwerk abtrennen: Schritt 17, Bild 1 von 3 PlayStation 4 Lüfteraustausch, Optisches Laufwerk abtrennen: Schritt 17, Bild 2 von 3 PlayStation 4 Lüfteraustausch, Optisches Laufwerk abtrennen: Schritt 17, Bild 3 von 3
    • Drücke den Metallhebel zum Ablösen des Flachbandkabels oben am optischen Laufwerks mit dem Fingernagel nach unten.

    • Ziehe mit den Fingern oder einer Pinzette an der schwarzen Lasche und löse das Flachbandkabel behutsam ab.

    • Beim Einschieben des Flachbandkabels muss der Metallhebel nicht gedrückt werden. Wenn es richtig drin ist, kannst du ein leichtes Klicken hören.

    Please note that the younger generations of PS4 have a different setup of connectors to the driver, its sometimes 3 of these as presented but with different sizes and no pad to press down. However, dont be alarmed, just use the pair of tweezers and gently pull them off the connectors of the motherboard. Grab on tight on the blue area of the ribbon cable and pull gently! They tend to sit tight so take some time and patience on this.

    Mathias Kopp - Antwort

    Thank you!!!

    Nick Bymolt -

  18. PlayStation 4 Lüfteraustausch: Schritt 18, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 18, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 18, Bild 3 von 3
    • Drücke den Metallhebel zum Ablösen des Flachbandkabels an der Hauptplatine mit dem Fingernagel nach unten.

    • Ziehe mit den Fingern oder einer Pinzette an der schwarzen Lasche und löse das Flachbandkabel behutsam ab.

    • Lege das Flachbandkabel für den späteren Zusammenbau zur Seite.

    • Beim Einschieben des Flachbandkabels muss der Metallhebel nicht gedrückt werden. Wenn es richtig drin ist, kannst du ein leichtes Klicken hören.

    bei mir ist das leider defekt Plastikteil abgebrochen wie kann ich das ersetzen

    kevin pospiech - Antwort

    Is it possible to buy the white port for ps4? My one seems to be damaged so won't hold the ribbon cable.

    dorszes - Antwort

    This may be a difficult fix, as the white port seems to be integrated into the motherboard. You could try simply holding the ribbon cable down with electrical tape, if it's just a fitting issue?

    hazelrat -

  19. PlayStation 4 Lüfteraustausch: Schritt 19, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 19, Bild 2 von 2
    • Trenne das Kabel zum optischen Laufwerk mit den Fingern oder einer Pinzette von der Hauptplatine ab.

  20. PlayStation 4 Lüfteraustausch: Schritt 20, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 20, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 20, Bild 3 von 3
    • Hole das Kabel zum optischen Laufwerk mit dem Finger oder einer Pinzette aus den Kabelführungen heraus.

  21. PlayStation 4 Lüfteraustausch, Optisches Laufwerk entfernen: Schritt 21, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Optisches Laufwerk entfernen: Schritt 21, Bild 2 von 2
    • Entferne die vier Schrauben, mit denen das optische Laufwerk befestigt ist:

    • Drei 9,7 mm Torx Schrauben

    • Eine 6,2 mm Kreuzschlitzschraube

  22. PlayStation 4 Lüfteraustausch: Schritt 22, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 22, Bild 2 von 2
    • Hebe das optische Laufwerk gerade aus der PS4 nach oben heraus.

  23. PlayStation 4 Lüfteraustausch, Gehäuseoberteil entfernen: Schritt 23, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Gehäuseoberteil entfernen: Schritt 23, Bild 2 von 2
    • Entferne die beiden 9,7 mm Torx Schrauben, mit denen das Gehäuseoberteil befestigt ist.

  24. PlayStation 4 Lüfteraustausch: Schritt 24, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 24, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 24, Bild 3 von 3
    • Hebe das Gehäuseoberteil nach hinten hoch und entferne es von der PS4.

    • Das Gehäuseoberteil ist an der Vorderseite eingerastet. Möglicherweise musst du ziemlich viel Kraft aufbringen.

    “Significant force” is a bit of an understatement. It’s like it’s superglued together..

    Wouter Rietberg - Antwort

    You absolutely should not need a lot of force for this. In the picture above, press upward using the left thumb from under the outer lip of the cover. You may need to pull it slightly toward you as well. Once that half is lifted, the right-hand side is still firmly attached. Keeping the left-hand side of the top separated, flip the unit over. Along the right-hand side, press the outside lip with your thumb about 2 thumb-widths down from the corner. There is a tab here and once released, the cover comes off easily and off in the back. Otherwise, you’ll be placing stress vertically (and rotationally) on the first tab on the side.

    Donovan Ray - Antwort

    I appreciate this feedback – thank you. This sounds like a safer method. I’ll test it on our guide unit and update the procedure.

    Sam Omiotek -

    THIS SET OF INSTRUCTIONS FROM YOU, IS ABSOLUTELY SENSATIONAL.

    I got this cover off quite easily. Still some resistance, but I didn't need this significant force at all.

    THANK YOU!!

    :)

    Cary B -

    There is a piece of plastic underneath the casing here. The PS4 I worked on got so hot on the inside that part of the plastic started to melt and warped some inside the metal plate underneath. This made it tricky to open the case, but by using spacers I managed to get it off.

    Kerstin - Antwort

    I found an easier method for myself is to have the console upright and pointed away from myself. From this position, wrap your fingers over the top of the cover, hooking it in its front with the last digits of each finger. This allows you to press with your palm into the top of the console and pry in an upward/outward motion. This feels safer as it took much less force to disengage the problematic clip.

    Callie - Antwort

  25. PlayStation 4 Lüfteraustausch, Obere EMI-Abschirmung entfernen: Schritt 25, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Obere EMI-Abschirmung entfernen: Schritt 25, Bild 2 von 2
    • Entferne die zwölf 9,7 mm Torx Schrauben, mit denen die obere EMI-Abschirmung befestigt ist.

    In my PS4, there is a small black Philips screw behind where the power lead connects to the motherboard. That screw connects the EMI shield to the inner metal where the power supply sits.

    Wouter Rietberg - Antwort

    I had exactly the same thing, and mine is a fairly old model of PS4. Confused me for a moment until I spotted it.

    Tom G -

    Can confirm this.

    This screw was on mine. To anyone reading this, flip the PS4 over and look where the pain in the ass power supply connector is.

    Black screw right there.

    If you have that screw of course. :)

    Cary B -

  26. PlayStation 4 Lüfteraustausch: Schritt 26, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 26, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 26, Bild 3 von 3
    • In diesem Schritt siehst du, wie die Andruckplatte richtig entfernt wird.

    • Entferne die beiden 15,6 mm Kreuzschlitzschrauben.

    • Drehe jede Schraube abwechselnd eine halbe Umdrehung auf und löse allmählich die Andruckplatte.

    • Das Abwechseln der Schrauben ist wichtig, damit die Andruckplatte gleichmäßig belastet bleibt.

    • Drehe nicht zuerst die Schraube an einer Seite ganz heraus, ohne auch die andere zu lösen. Du könntest dadurch den Prozessor beschädigen.

    why does my PS4 have some metal thing attaching the plate to the metal beneath it?

    Beetroot - Antwort

    My PS4 also has 2 metal rings around each screw hole and 4 metal pieces 2 on each side closing in the same shape as the pressure plate as you take the pressure plate off?

    Geoff King - Antwort

    How strong do you tighten the screws when re-applying the plate?

    To the max, or stop one to two turns before?

    Andreas Raum - Antwort

    I've tightened mine until the screws became taut and I've not had any stability issues.

    hazelrat -

  27. PlayStation 4 Lüfteraustausch: Schritt 27, Bild 1 von 1
    • Entferne die Andruckplatte.

  28. PlayStation 4 Lüfteraustausch: Schritt 28, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 28, Bild 2 von 2
    • Entferne die obere EMI-Abschirmung.

    This is the 2nd PS4 I have disassembled and on both units I have found there is a black Phillips screw securing the upper EMI shield. This should be mentioned in the teardown as the EMI shield cannot be removed completely without first removing this screw and you risk damaging the EMI shield in the process . To locate the screw turn the unit over and you will see a small black Phillips screw located near the power supply prongs. There will be a set of arrows pointing to the screw. Once you remove this screw then you can fully release the upper EMI shield.

    Geoff King - Antwort

    Ditto. This is my first time disassembling a PS4. EMI shield didn’t lift off easily on one corner. Noticed the black Phillips screw holding it in place. I scrolled up in the tutorial to see if I missed it. Easy enough.

    Kwan Park Tom - Antwort

    All the ps4's I opened had this one Phillips screw. And I've cleaned/repaired ~12 units. So I think it's safe to assume that (almost) every one of them have it.

    Manoel - Antwort

    throw it way, electromagnetic fields dont exist

    Isaac Voorheis - Antwort

  29. PlayStation 4 Lüfteraustausch, Hauptplatine entfernen: Schritt 29, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Hauptplatine entfernen: Schritt 29, Bild 2 von 2
    • Setze das flache Ende des Spudgers zwischen dem Lüfterkabel und der Hauptplatine ein.

    • Verdrehe den Spudger, so dass sich der Stecker gerade nach oben hebt und von der Hauptplatine löst.

    Mir ist der Stecker leider von der Platine gerissen 🫣 kann man den wieder dran löten?

    V. B. - Antwort

  30. PlayStation 4 Lüfteraustausch: Schritt 30, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 30, Bild 2 von 2
    • Fasse die Hauptplatine an der Kante vorne an der PS4 an.

    • Hebe die Hauptplatine hoch, bis die USB-Anschlüsse aus dem Gehäuse der PS4 herauskommen.

  31. PlayStation 4 Lüfteraustausch: Schritt 31, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 31, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 31, Bild 3 von 3
    • Hebe die Hauptplatine aus der PS4 heraus.

    • Bevor du den Prozessor auf der Hauptplatine befestigst, musst du eine Schicht Wärmeleitpaste auftragen. Benutze dazu diese Anleitung.

    • Wenn die Wärmeleitpaste nicht richtig aufgetragen ist, kann die PS4 überhitzen.

    • Setze die I/O-Seite der Hauptplatine zuerst ein, lasse dann die andere Seite absinken.

    That shiny metal cover box on the opposite side of the hdi port shown in picture 30 at the very front is showing over heating signs I guess very brown around the edges I think is causing my PS4 not to show up on tv any ideas how to fix that hdi port looks fairly good to me but the black plastic port shows burnt signs as well that's on the same side of the HDMI port but the shiny metal cover is on the opposite side

    Newuser7878 - Antwort

  32. PlayStation 4 Lüfteraustausch, Untere EMI-Abschirmung entfernen: Schritt 32, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Untere EMI-Abschirmung entfernen: Schritt 32, Bild 2 von 2
    • Entferne die drei 6,2 mm Kreuzschlitzschrauben, mit denen die untere EMI-Abschirmung befestigt ist.

  33. PlayStation 4 Lüfteraustausch: Schritt 33, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 33, Bild 2 von 2
    • Hebe die untere EMI-Abschirmung und den Kühlkörper gerade nach oben aus der PS4 heraus.

  34. PlayStation 4 Lüfteraustausch, Lüfter entfernen: Schritt 34, Bild 1 von 2 PlayStation 4 Lüfteraustausch, Lüfter entfernen: Schritt 34, Bild 2 von 2
    • Entferne die beiden 6,2 mm Kreuzschlitzschrauben vom Lüfter.

    The screw located to the far left in the picture above is in a different place in my PS4. In mine it is located in the hole at the very top right hand corner of the fan right next the the black plastic post that secures it in place. The other screw is located in the same position as shown above.

    Geoff King - Antwort

    Agree. Screw on top left is wrong. That screw is for EMI plate. The right screw is top right.

    Munir Ib - Antwort

    Hi Munir, thanks for pointing this out, are you doing this repair on a PS4 Pro or PS4 Slim?

    Sam Omiotek -

    Same comment about the location of the screw that shows up on the bottom left. You can see it's in the wrong place because it isn't there when lifting the EMI shield in the second picture of step 33, and the EMI shield has an arrow on it pointing to the actual screw location (barely visible in the photos, but visible).

    Model is CUH-1004A

    Bastien Nocera - Antwort

    It’s the screw to the top right and the screw pictured on the left comes down through the lower EMI shield

    Christopher DeSousa - Antwort

  35. PlayStation 4 Lüfteraustausch: Schritt 35, Bild 1 von 2 PlayStation 4 Lüfteraustausch: Schritt 35, Bild 2 von 2
    • Hebe den Lüfter gerade nach oben aus dem Gehäuse der PS4 heraus.

    When installing the new fan, the holes may be slightly out-of-spec. If the fan is not completely seated, I suggest making a minor adjustment to the hole that is off with a Dremel bit. (the ball-like one worked for me). Tried to use a regular drill bit and power drill but couldn’t cut it. Dremel bit had it expanded perfectly in seconds. In my case, the errant hole was the one that fits into a plastic post, closest to the corner and at the bottom of the picture above.

    Donovan Ray - Antwort

  36. PlayStation 4 Lüfteraustausch: Schritt 36, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 36, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 36, Bild 3 von 3
    • Ziehe den Schaumstoffstreifen behutsam mit einer Pinzette vom Lüfter ab.

    • Bringe den Schaumstoffstreifen an der gleichen Stelle auf dem neuen Lüfter an.

    what happen if i don’t get all of them on there correctly?

    cutyoffapercy - Antwort

    what happen if i don’t get all of them on there right?

    cutyoffapercy - Antwort

    The padding strip was too degraded to remove intact. Instead, I purchased a rectangular felt strip from the hardware store. I inked the existing pad and used it as a “stamp” on the peel-away part of the felt pad and cut with scissors. Placed new curved strip onto new fan and trimmed height with X-acto blade.

    Donovan Ray - Antwort

  37. PlayStation 4 Lüfteraustausch: Schritt 37, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 37, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 37, Bild 3 von 3
    • Ziehe die Schaumstoffstücke vom Lüfter ab.

    • Benutze, wenn nötig, einen Haartrockner oder ein Heißluftgebläse, um den Kleber aufzuweichen.

    • Bringe die Stücke an den gleichen Stellen am neuen Lüfter an, die Kleberreste am alten Lüfter zeigen dir die genauen Stellen an.

    My original fan did not have any pads to transfer. Used foam weather stripping instead.

    Donovan Ray - Antwort

  38. PlayStation 4 Lüfteraustausch: Schritt 38, Bild 1 von 3 PlayStation 4 Lüfteraustausch: Schritt 38, Bild 2 von 3 PlayStation 4 Lüfteraustausch: Schritt 38, Bild 3 von 3
    • Ziehe den Klebestreifen ab, mit dem das Lüfterkabel befestigt ist.

    • Setze den Klebestreifen auf den neuen Lüfter, um das Kabel an genau der gleichen Stelle zu befestigen.

Abschluss

Um dein Gerät wieder zusammenzubauen, folge diesen Schritten in umgekehrter Reihenfolge.

Entsorge deinen Elektromüll fachgerecht.

Hat die Reparatur nicht ganz geklappt? In unserem Forum findest du Hilfe bei der Fehlersuche.

Vergleiche dein Ersatzteil mit dem Originalteil. Möglicherweise musst du fehlende Bauteile übertragen oder Schutzfolien vom Neuteil abziehen, bevor du es wieder einbauen kannst.

273 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Sam Omiotek

Mitglied seit: 02/25/19

71.951 Reputation

288 Anleitungen geschrieben

35 Kommentare

Great guide, but where to buy a fan for the ps4?!

frankeinarhaugen - Antwort

Look one ebay, that's where my store gets the majority of out parts from. considering we fix computers.

jonathon saygidia -

Will this guide work with the CUH-1200 model?

Jose Alvizo - Antwort

excellent camarade !

Beaux travail !

Attention au principe de peter... Niveaux d'incom.......

je déconne !

P.S. Ne pas se ronger les ongles ca evite les pinces a épiler !

je déconne pas !

Inversement ce pas très esthétique...

Change rien !

Dall - Antwort

My PS4 has been overheating so I decided to take it apart and clean it. I cleaned it well but it still over heats the fan will try to start up but cuts back off plz help

Tristen hudson - Antwort

Replace the fan ... Yours works intermittently that probably means ut has a bad bearing.

chrisforfacebook1987 -

Does the Model work for the CUH-1116A ????

ITS HD - Antwort

Does the fan recommended work for the Model CUH-1116A if not do you know where you can recommend me to get one that's compatiable for it thank you.

ITS HD - Antwort

Well, after replacing the fan, triple checking every thing and plugging it back in…. I got nothing. No power at all.

took it all apart three times to make sure all cables, connections and touch sensors were making contact. Still nothing.

With the bad fan in it at least still powered on befor this.

Many help appreciated !

TomJ - Antwort

Did you find a solution

tchageman -

Did you find a solution? I’m currently having the same issue!

ketaamarie17 -

This was a great guide! I successfully completed the repair today. Thanks for the comprehensive steps and accompanying photos.

Dylan - Antwort

Thank you very much for this repair instructions. I do have one question. At the top of metal plate of the fan are none of the four (I guess) cooling pads shown on the pictures. With which material can I replace them (thickness?)? Thank you in advance.

Marinho - Antwort

My power button doesn’t work, but the eject works and the console seems to be running fine when I turn it on with my controller. Any ideas on what I did wrong?

Megan - Antwort

I followed the guide with no issues, but when I hooked my ps4 up again and pressed the power button, the console beeped, I got the blue light, but then it turned off. No fan, no screen, nothing.

The power button works, and there is power - otherwise I wouldn’t get a beep.

So I took it apart and reinstalled the old noisy fan. When I put it back together, same result.

Anyone have any ideas what the problem could be?

Derek - Antwort

Nice man. Very very so good your guide.

leo.woiciechoski - Antwort

Did this repair, fan is better but now my PS4 cuh-1116a won’t read any game discs?! It did beforehand but I did notice there is a bracket on the top of my optical drive? Is it in the wrong way? Could a wire being loose cause this and if so which one? Any help is appreciated thanks.

Charis Smith - Antwort

After I replaced the fan and thermal paste and reassembled my ps4, I have NO POWER at all. I have disassembled and reassembled countless times to make sure I didn’t miss something. All wires are correctly placed. Someone please help!

ketaamarie17 - Antwort

https://www.easeus.com/resource/how-to-f...

There is also a risk of frying components with static electricity if your were touching all over the motherboard.

Tom Riddle -

Cleaned out the dust and when I put it back together everything worked perfectly, and the stock fan is now silent.

Tom Riddle - Antwort

my playstation is now booting in Safe Mode… please help!

Joe Aguirre - Antwort

My fan circuit was damaged so i try to power the fan by an external 12V 1.5 amp power supply (your typical adapter 230v-12v)

However when i connect brown wire with +12v and the black one with Minus- , it spins for a couple seconds then stops.

Repeatedly does the same .

So my question is, where is the grey wire for and where do i connect it? Is it a speed regulator? Can i add the grey wire with the plus or the minus?

F.p. - Antwort

Great guide. Used it to replace the fan on my PS4 launch edition.

Hernan Trujillo - Antwort

I followed this guide step by step, things were going smoothly… after several hours I reach the finish line, I plug it all in get it hooked up, ready to play ,,, bam smoke and sparks come out the back and now its toast. .

jlc1167 - Antwort

My PS4 layout does not look like this in step 1? My model is CUH-1215A

Rick Sanchez - Antwort

Ps4 turns on but when I load a game the red line appears and it shuts off.

Jarrett Conrey - Antwort

I replaced the thermal paste and now it's working great. No more overheating red light. Silent as a fish running full throttle. Thank you so much for making this for us!

Jarrett Conrey - Antwort

Thank you! Worked like a charm. The worst part was that it died right before the weekend so I had to wait longer to get the new fan. It was actually a pretty fun repair.

Andy Conklin - Antwort

why so much things just to get to the fan?

BrysonDowning998697 - Antwort

It is because the EMI shield has to be removed to access the fan screws, unfortunately.

Sam Omiotek -

Thank you. Great guide. I used it to disassemble my PS4 to clean it. Works great!

Benedick Miller - Antwort

İnanılmaz güzel bir rehber. PS4’ün sesinden eser kalmadı. Teşekkürler…

An amazing guide. Fan noise completely gone. Thanks…

Onur Gülce - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 89

Letzte 7 Tage: 562

Letzte 30 Tage: 2,532

Insgesamt: 496,230