Zum Hauptinhalt wechseln

PlayStation Vita Wi-Fi Antenna Replacement

Was du brauchst

  1. PlayStation Vita Wi-Fi Antenna Replacement, Case Separation: Schritt 1, Bild 1 von 2 PlayStation Vita Wi-Fi Antenna Replacement, Case Separation: Schritt 1, Bild 2 von 2
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

  2. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 2, Bild 1 von 3 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 2, Bild 2 von 3 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 2, Bild 3 von 3
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

  3. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 3, Bild 1 von 2 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 3, Bild 2 von 2
    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

  4. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 4, Bild 1 von 3 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 4, Bild 2 von 3 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 4, Bild 3 von 3
    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

  5. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 5, Bild 1 von 2 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 5, Bild 2 von 2
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    One of the shoulder buttons fell out when I was doing this step, along with the piece holding it in place. They go back in just fine when reassembling but make sure that they are oriented properly, of course.

    klung - Antwort

  6. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 6, Bild 1 von 1
    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

  7. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 7, Bild 1 von 1
    • Free the battery cable by gently prying up on the connection with a spudger.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones - Antwort

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna - Antwort

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry - Antwort

    This component was far more stubborn than the screen connector when it came to removal. I opted for a smaller tool than the spudger (small flat-head) and managed to disconnect it after determining the best bit size for the job. Screwdriver is metal, obviously, so being gentle helps to avoid damaging anything.

    klung - Antwort

    broke the white part

    Benaya Miller - Antwort

  8. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 8, Bild 1 von 1
    • Separate the front and rear cases.

  9. PlayStation Vita Wi-Fi Antenna Replacement, Wi-Fi Antenna: Schritt 9, Bild 1 von 2 PlayStation Vita Wi-Fi Antenna Replacement, Wi-Fi Antenna: Schritt 9, Bild 2 von 2
    • Using the pointy end of a spudger, gently pry the white Wi-Fi antenna cable connecotr off of the wireless card.

    • Deroute the Wi-Fi antenna cable out of the black plastic casing.

  10. PlayStation Vita Wi-Fi Antenna Replacement: Schritt 10, Bild 1 von 2 PlayStation Vita Wi-Fi Antenna Replacement: Schritt 10, Bild 2 von 2
    • Using the pointy end of the spudger, gently pry the Wi-Fi antenna cable connector off of the left button board at the connection.

    • Remove the Wi-Fi antenna cable.

    Why is it the wifi antenna if the cable is connected to the cellular board? it is the primary cellular antenna. the wifi antenna is the 2 small antennas in the upper half of the back case

    Tom Chai - Antwort

    Followed the instructions here to open up and check the cabling for the WiFi ( PS Vita no longer connects to WiFi), however I did NOT find any cables except flat ribbon cables. PS Vita model PCH-1003.

    Paul McCulloch - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

Mitglied seit: 03/05/12

88.898 Reputation

131 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

16.573 Anleitungen geschrieben

4 Kommentare

what about the ps vita slim 2000 model? ive got no wifi at all but cant see a teardown to find the wifi module

Keegan - Antwort

Is WiFi / 3G antenna cable: UFL/IPEX to UFL/IPEX 1.3mm? What is the white cable length?

samohvalov2010 - Antwort

Yeah this is not a Wifi antenna cable. The "wireless card" only does 3G and GPS/Glonass. Wifi controller is on the mainboard itself.

computer1up - Antwort

^ okay that explains a lot, i thought i was missing parts in my PSV1000 wifi

Bronson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 15

Letzte 30 Tage: 64

Insgesamt: 8,283