Einleitung
This guide will teach someone how to take off a damaged or torn wrist strap on the Polar M400 and replace it with a new one. A damaged wrist strap could be due to excessive wear and tear or wearing it in wet conditions.
Was du brauchst
-
-
Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.
-
-
-
-
Apply an upward pressure to the holes until the locking pins release.
-
Use precision tweezers to remove the pins that connect the face with the strap.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
5 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
University of Maine, Team S1-G3, Diaz Fall 2017 Mitglied von University of Maine, Team S1-G3, Diaz Fall 2017
UMAINE-DIAZ-F17S1G3
4 Mitglieder
7 Anleitungen geschrieben
2 Kommentare
I am trying to do the same on my Polar v800 and I cannot remove the locking pins, they seem to be “stuck”, any idea how to loosen them?
Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?
