Repariere deine Sachen Community Store

Polaroid Automatic 100 Bottom Frame Spring Replacement

Einleitung

The spring is located within a slender metal mount that is screwed into the front underside of the Polaroid. It is below the camera lens and can be seen through the mount it is within.

Was du brauchst

  1. Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: Schritt 1, Bild 1 von 3 Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: Schritt 1, Bild 2 von 3 Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: Schritt 1, Bild 3 von 3

    • Fully extend the bellows to prevent collapse using the #1 tab.

    • Remove the camera cover in order to make the camera easier to work with.

    • When collapsing bellows, press down on the metal frame above the bellows.

    Bearbeiten

  2. Polaroid Automatic 100 Bottom Frame Spring Replacement: Schritt 2, Bild 1 von 1

    • Remove the Phillips #0 6mm screw on the shutter mount and the washers using a size 5 nut driver.

    Bearbeiten

  4. Polaroid Automatic 100 Bottom Frame Spring Replacement: Schritt 3, Bild 1 von 1

    • Unscrew the 4.5 mm Phillips screw on the right with a Phillips #0 Screwdriver.

    Bearbeiten

  5. Polaroid Automatic 100 Bottom Frame Spring Replacement: Schritt 4, Bild 1 von 3 Polaroid Automatic 100 Bottom Frame Spring Replacement: Schritt 4, Bild 2 von 3 Polaroid Automatic 100 Bottom Frame Spring Replacement: Schritt 4, Bild 3 von 3

    • Remove the spring from the shutter mount.

    • The hooks on the ends of the spring within the shutter mount may recoil when being removed, and may be sharp enough to puncture skin.

    • When reassembling, getting the smaller screw on the right hand side can be challenging. It may be helpful to tip the camera upside down so that gravity helps the screw fall into place.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 4 anderen Mitwirkenden

Katie Miller

Mitglied seit: 04/14/15

680 Reputation

5 Anleitungen geschrieben

Auszeichnungen: 9

+ 6 weitere Auszeichnungen

Team

Cal Poly, Team 4-3, Maness Spring 2015 Mitglied von Cal Poly, Team 4-3, Maness Spring 2015

CPSU-MANESS-S15S4G3

4 Mitglieder

6 Anleitungen geschrieben

Ein Kommentar

Thank you so very much!!!

You saved my camera and my sanity!!!!

CAROL HOLDER - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 7

Insgesamt: 1,074