Einleitung
The spring is located within a slender metal mount that is screwed into the front underside of the Polaroid. It is below the camera lens and can be seen through the mount it is within.
Was du brauchst
-
-
Fully extend the bellows to prevent collapse using the #1 tab.
-
-
-
Remove the Phillips #0 6mm screw on the shutter mount and the washers using a size 5 nut driver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Ein Kommentar
Thank you so very much!!!
You saved my camera and my sanity!!!!