Einleitung
If you need to replace the film door latch, use this guide to access the inside of the camera. You may need to replace the latch if your camera will not close.
Was du brauchst
-
-
Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
University of Alabama, Team S1-G1, Bedsole Fall 2018 Mitglied von University of Alabama, Team S1-G1, Bedsole Fall 2018
UA-BEDSOLE-F18S1G1
4 Mitglieder
5 Anleitungen geschrieben
2 Kommentare
This doesn’t actually say anything about replacing the latch…
But where do you buy a replacement latch?
