Zum Hauptinhalt wechseln

Einleitung

This guide will show how to remove the face plate, which is necessary to exposing the internal components.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Begin by opening the top of the camera (flash assembly) to a slight angle. Next, angle the flash assembly slightly upward and pry off the connections carefully. Be careful not to damage the ribbon cable. This is essential to the operation of the flash.
    • Begin by opening the top of the camera (flash assembly) to a slight angle.

    • Next, angle the flash assembly slightly upward and pry off the connections carefully.

    • Be careful not to damage the ribbon cable. This is essential to the operation of the flash.

  2. Slide the action button, on the bottom of the camera, to open the bottom. Slide the action button, on the bottom of the camera, to open the bottom.
    • Slide the action button, on the bottom of the camera, to open the bottom.

  3. Insert the blue plastic opening tool between the rear case and the plastic tabs directly under the shelf, and pry it loose. Pull off the face plate. Pull off the face plate.
    • Insert the blue plastic opening tool between the rear case and the plastic tabs directly under the shelf, and pry it loose.

    • Pull off the face plate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tyler OBrien

Mitglied seit: 22.09.2014

534 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team 3-5, Brown Fall 2014 Mitglied von USF Tampa, Team 3-5, Brown Fall 2014

USFT-BROWN-F14S3G5

3 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 64