Einleitung

Replacing a broken or scratched lens on a Polaroid Sun 600 LMS.

Move film door slide on the left side of camera forward.
  • Move film door slide on the left side of camera forward.

  • Pull film door open.

Kommentar hinzufügen

Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.
  • Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.

  • If your camera is old or dirty, it may take more force to open the flash assembly.

Kommentar hinzufügen

  • Use a spudger on each side to separate the flash segment from the main body.

  • Be careful not to do this too hard because you may pull out the connecting wires.

Kommentar hinzufügen

  • Use several plastic opening tools around the edges of the camera's body to separate it from the plastic frame.

Kommentar hinzufügen

  • Place left hand on the gray section and right hand on the black section.

  • Pull the sections apart.

Kommentar hinzufügen

  • Carefully remove the damaged lens from the interior of the camera.

  • Replace with a new lens.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Ian Hosek

Mitglied seit 20.01.2010

345 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 3-18, Maness Winter 2010 Mitglied von Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 11

Letzte 30 Tage: 37

Insgesamt: 7,392