Zum Hauptinhalt wechseln

Einleitung

Taking off the back of this phone will allow you to look at or replace all of the pieces inside this device. This is a prerequisite guide for any other replacement you would like to accomplish with your SoundStation.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.
    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

  2. Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off! Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 Mitglied von USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014

USFSM-STEWART-F14S1G3

3 Mitglieder

14 Anleitungen geschrieben

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 5

Insgesamt: 951