Zum Hauptinhalt wechseln

Polycom SoundStation Back Housing Replacement

Was du brauchst

  1. Polycom SoundStation Back Housing Replacement, Back Housing: Schritt 1, Bild 1 von 1
    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

  2. Polycom SoundStation Back Housing Replacement: Schritt 2, Bild 1 von 2 Polycom SoundStation Back Housing Replacement: Schritt 2, Bild 2 von 2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 Mitglied von USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014

USFSM-STEWART-F14S1G3

3 Mitglieder

14 Anleitungen geschrieben

Ein Kommentar

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 5

Insgesamt: 1,147