Zum Hauptinhalt wechseln

Power Mac G4 Cube Airport Card Replacement

Was du brauchst

  1. Power Mac G4 Cube Airport Card Replacement, Outer Case: Schritt 1, Bild 1 von 3 Power Mac G4 Cube Airport Card Replacement, Outer Case: Schritt 1, Bild 2 von 3 Power Mac G4 Cube Airport Card Replacement, Outer Case: Schritt 1, Bild 3 von 3
    • Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

  2. Power Mac G4 Cube Airport Card Replacement: Schritt 2, Bild 1 von 2 Power Mac G4 Cube Airport Card Replacement: Schritt 2, Bild 2 von 2
    • Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

  3. Power Mac G4 Cube Airport Card Replacement: Schritt 3, Bild 1 von 1
    • Slowly lift the plate off the cube and disconnect the power cord.

  4. Power Mac G4 Cube Airport Card Replacement: Schritt 4, Bild 1 von 1
    • Remove the four pillars from each corner.

    • The pillars should come out fairly easily.

  5. Power Mac G4 Cube Airport Card Replacement, Airport Card: Schritt 5, Bild 1 von 2 Power Mac G4 Cube Airport Card Replacement, Airport Card: Schritt 5, Bild 2 von 2
    • Pull outwards on the antenna cable.

    • Pull on the clear tab outwards to remove the existing AirPort card

    • Slide in the new AirPort card and connect the antenna cable

Abschluss

To reassemble your device, follow these instructions in reverse order.

8 weitere Nutzer:innen haben diese Anleitung absolviert.

Ryan Chun

Mitglied seit: 06/24/10

1.076 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 2-7, Johann Summer 2010 Mitglied von Cal Poly, Team 2-7, Johann Summer 2010

CPSU-JOHANN-R10S2G7

5 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 36

Insgesamt: 9,874