Einleitung

This guide details the removal of the main fan from the fan housing.

Pull on outer latch.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Kommentar hinzufügen

Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.
  • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

  • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

Kommentar hinzufügen

  • Remove the power cable from the fan and detach bracing.

Kommentar hinzufügen

  • To fully remove the fan, unfasten the 4 screws on the front of the bracing using the Phillips #2 screwdriver.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Stephen Scruggs

Mitglied seit 20.01.2010

2.035 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 13-24, Maness Winter 2010 Mitglied von Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 7

Insgesamt: 6,142