Einleitung

The Power Mac G4 Uses the standard PCMCIA AirPort card found in Macs from 1999-2004.

*The Firewire 800 Model uses an AirPort Extreme Card found in iBook G4's And 1Ghz+ iMac G4's.*

Werkzeuge

Kein Werkzeug erforderlich.

The Power Mac G4 MDD: the last, and the fastest G4-based Mac.  This computer boasted up to a Dual 1.42GHz PowerPC G4 CPU (though I have a single 1.25GHz). Six USB ports.
  • The Power Mac G4 MDD: the last, and the fastest G4-based Mac. This computer boasted up to a Dual 1.42GHz PowerPC G4 CPU (though I have a single 1.25GHz).

  • Six USB ports.

  • Four FireWire ports.

  • Assorted SCSI (SCSI50/SCSI68)

  • Assorted Audio

  • Video (ADC & DVI)

  • Networking (RJ-45 Ethernet/56k Modem)

  • Some later model MDD's (such as the dual 1.42GHz) Have a FireWire 800 Port Here:

Kommentar hinzufügen

Pull on the side lever and lower the side of the case. Pull on the side lever and lower the side of the case. Pull on the side lever and lower the side of the case.
  • Pull on the side lever and lower the side of the case.

Kommentar hinzufügen

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
The AirPort card is located next to the graphics card. If your computer has a FireWire 800 port between the FireWire 400 Ports and the Ethernet Ports then your computer uses an AirPort Extreme 802.11g Card (See Related Parts). If your computer has no firewire 800 port, then your computer uses an 802.11b AirPort PCMCIA Card (Also See Related Parts). Removal of both cards is pretty much the same. First disconnect the antenna from the card, it may be helpful to use a spudger or flathead screwdriver.
  • The AirPort card is located next to the graphics card.

  • If your computer has a FireWire 800 port between the FireWire 400 Ports and the Ethernet Ports then your computer uses an AirPort Extreme 802.11g Card (See Related Parts). If your computer has no firewire 800 port, then your computer uses an 802.11b AirPort PCMCIA Card (Also See Related Parts). Removal of both cards is pretty much the same.

  • First disconnect the antenna from the card, it may be helpful to use a spudger or flathead screwdriver.

  • Now, grasp the plastic tab on the back of the card and pull it out of the computer.

Kommentar hinzufügen

The Airport 802.11b PCMCIA Card.
  • The Airport 802.11b PCMCIA Card.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

9 weitere Nutzer haben diese Anleitung absolviert.

Chris Green

Mitglied seit 11.10.2009

31.845 Reputation

46 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

276 Mitglieder

717 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 15

Letzte 30 Tage: 60

Insgesamt: 25,393