Einleitung

This is meant to be a private prereq guide.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. The handle to open your computer is located on top of the right side panel.
    • The handle to open your computer is located on top of the right side panel.

  2. Grab the circular handle and pull outward. Grab the circular handle and pull outward.
    • Grab the circular handle and pull outward.

  3. Your computer is now open and ready for repair.
    • Your computer is now open and ready for repair.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. The optical drive is in the top left corner of the case.
    • The optical drive is in the top left corner of the case.

  6. There are four screws to be removed. The first screw can be seen in the first picture.
    • There are four screws to be removed.

    • The first screw can be seen in the first picture.

    • The remaining three screws can be seen in the second picture.

  7. Remove the optical drive by pulling the drive away from the front of the computer and out.
    • Remove the optical drive by pulling the drive away from the front of the computer and out.

  8. Detach the two cables attached to the back of the drive.
    • Detach the two cables attached to the back of the drive.

    • The flat ribbon cable can be detached by pulling the silver tab. The multicolored cable can be removed by grasping the plastic connector on either side and pulling with substantial force.

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer haben diese Anleitung absolviert.

Jacob Garcia

Mitglied seit: 28.01.2010

483 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 14-41, Regan Winter 2010 Mitglied von Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Mitglieder

10 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 4,831